|
What's New |
|
Drive Assembly Washer (Used)
(37-3-26a*) For all models except Series 1 & early Series 2 (1 required) Second-hand/used and in good condition (1 required) Discount is not applicable
|
NO IMAGE |
 |
|||
|
|||||
|
Drive Assembly Washer (Innocenti) Used
(37-3-26*) For all models except Series 1 & early Series 2 (1 required) Second-hand/used and in good condition (1 required) Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
J-Range (SIL Sunny FR) Crankshaft Kit
(17-2-19f*) Kit consists of J-Range Sunny FR crankshaft, Fag drive side bearing 20 x 47 x 14, magneto flange, magneto flange bearing, magneto flange inner washer, magneto flange crankshaft bearing washer, large & small magneto oilseal.
|
NO IMAGE |
|
|||
|
|||||
|
J-Range Dellorto Spring Loaded Float Needle (SHB18.16) Red Tip
(17-6-30b*) 3-sided spring loaded float needle with red tip for all J-Range SHB18.16 Dellorto carburettors (1 required) Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
GP125/150 Forks (SIL) Slightly Damaged (Buy 10 deal)
(21-106a*) Buy 10 slightly damaged GP125/150 forks, can be used for either Italian or Indian GP models. This item is on Special Offer, discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
LI/SX Gear Selector Shaft (Italian)
(4-52a*) Gear selector shaft for LI, TV, SX, Series 1, 2 & 3 models. (1 required) Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Front Brake Shoes C, D, Late LD MK I, MK II & MK III (125mm) a pair
(19-14-30b*) Front brake shoes for C, D, Late LD MK I, MK II & MK III models (1 pair required) 125mm in diameter. Original Part No. 99094450. Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
J-Range Dellorto Float Needle (SHB18.16) Red Tip
(17-6-30a*) 3-sided float needle with red tip for all J-Range SHB18.16 Dellorto carburettors (1 required) Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Lambretta Model E Front Hub (Used)
(37-19-33*) Complete front hub for Model E. Second-hand/used and in good condition. (1 required)
|
NO IMAGE |
|
|||
|
|||||
|
LI/TV/SX Fork Piston (Italian)
(8-76d*) For all Series 1, 2 & early Series 3 models (2 required)
|
|
|
|||
|
|||||
|
175LI 3-Wheeler Ducati 6-Pole Stator Plate (Innocenti) Used
(37-28-8*) Ducati 6-pole stator plate for late Innocenti Lambro 175 3-wheelers fitted with a 12V electrical system. (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
GP/SX Silentblock Bush (3-Holes) SIL (Slightly Marked)
(41-36*) Silentblock bush with minor marks/rust for GP, SX, LI150 Special, TV175 Series 3, and TV200. A long engine spindle is required with this bush. (2 required) Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Petrol Tank (Bare Metal)
(6b-47l*) Petrol tank as per original in bare metal for all models. (1 required) Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Inside Legshield Spare Wheel Carrier (Series 3) Without Paint (Slightly Damaged)
(41-35*) For all Series 3 models without (in primer) paint. Carrier will need one stud welded onto carrier. Comes with stud & rubber gaskets. (not suitable for Series 1, 2 or GP models) Discount is not applicable
|
|
|
|||
|
|||||
|
Rim/Hub 13mm Domed Nut (Stainless Steel)
(9-35e*) Rim/hub nut in stainless steel for Series 3 & GP models (4 required per wheel rim)
|
NO IMAGE |
|
|||
|
|||||
|
Lambro 600M/600V Right-Hand Door Handle with Lock & Keys (Innocenti)
(32-17-33*) Lambro 600M/600V right-hand door handle with lock & keys (1 required) Part No. 43056077. Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Series 3 Stand Splash Plate (Stainless Steel)
(7-32i*) For all Series 3 & GP models. Also available for Series 1 & early Series 2 & also Late Series 2. Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
J Range J-50 Headlight Bulb (12V 15W)
(17-11-55a*) 12V 15W single filament headlight bulb for use with 12V electrical system, J-50 model only (1 required) Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
J-Range Continental White Wall Tyre (3.00 x 10)
(17-10-60c*) For all J-Range models except early J-50 (2 required) Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Vespa T5 Front Mudguard (Italian)
(40-13-13d*) Front mudguard for T5 125 1986-1990 model. (1 required)
|
NO IMAGE |
|
|||
|
|||||
|
Gear Flange Studs, Nuts & Washers Set (Made in the UK)
(1-7c*) Set includes; 6 gear flange studs (M7 x 26mm), 6 x 7mm end plate nuts (Correct Height) and 6 x 7mm end plate spring washers. Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Cylinder Studs, 14mm Cylinder Head Nuts & Washers Set
(1-11g*) For all models except Series 1 (1 set required) Set consists of 4 x cylinder studs, 3 x cylinder head nuts (14mm A/F), 1 x cylinder head distance nut (14mm A/F) & 4 large wavy M8 washers. Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Gear Flange Stud (Made in the UK)
(1-7b*) Gear flange stud for all models. (6 required) Size M7 x 26mm. Manufactured in the UK.
|
NO IMAGE |
|
|||
|
|||||
|
Cylinder Head Assembly Distance Nut (14mm A/F) Made in the UK
(1-51b*) Cylinder head assembly distance nut (14mm A/F across flats) for all models (1 required) Made in the UK.
|
NO IMAGE |
|
|||
|
|||||
|
Vespa Clutch Side Bearing Circlip (Large Frame) Italian
(40-1-36a*) Vespa clutch side bearing circlip for PX, PE, Cosa, Bajaj, LML, Rally, GL, Sprint & Super models (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
ScooterNova Magazine (Issue 23 - January/February 2021)
(20-62-23*) ScooterNova Magazine, Issue 23 - January/February 2021. Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Flat Airscoop for Pegasus Dual Seat (Grey Primer)
(6b-54f*) Flat airscoop in grey primer for Pegasus seat when using an standard airfilter box system (Made in Vietnam) Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Rear Horizontal Spare Wheel/Luggage Carrier (LD) Chrome (Cuppini)
(19-21-112e*) Rear horizontal spare wheel & luggage carrier in chrome for LD models. Manufactured by Cuppini in Italy. Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
C, D, E & LD Rear Brake Shoes (Italian) a pair
(19-14-34b*) Rear brake shoes for C, D, E, LD MK I, MK II & MK III models (1 pair required) Original Part No. 99094530. Discount is not applicable
|
|
|
|||
|
|||||
|
125 D/LD 1st Gear Cogs (Casa Lambretta M 289)
(19-4-39*) 1st gear cogs for 125 D & LD models (1 pair required) Discount is not applicable
|
|
|
|||
|
|||||
|
Model A/B/C/LC Conrod Kit (Casa Lambretta M 24)
(19a-35*) Conrod kit for A, B, C & LC models. (1 required) Original Part No. 2M1041. Discount is not applicable
|
|
|
|||
|
|||||
|
Lambretta Model E/F Clutch Plates (Set of 2) Casa Lambretta M 126
(19a-34*) Clutch plates for E & F models. (1 set required) Manufactured in Italy by Surflex. Original Part No. 92010. Discount is not applicable
|
|
|
|||
|
|||||
|
Lambretta Model E/F Handlebar Throttle/Gear Chrome Covers (a pair) Casa Lambretta L 168
(19a-33*) Handlebar throttle & gear chrome covers for E & F models. (1 pair required) Original Part No. 9 6 128/115. Discount is not applicable
|
|
|
|||
|
|||||
|
D/LD MK III Clutch Cable Ferrule (Casa Lambretta L 61)
(19-20-40*) Clutch cable ferrule for D & LD MK III models (1 required) Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Lambretta Model A/B Rear Luggage Box Lock (Casa Lambretta C 129)
(19a-32*) Rear luggage box for A & B models. (1 required) Original Part No. 2S1116. Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
C/LC/D/LD/E/F Number Plate Surround (Chrome) Casa Lambretta A 127
(19-21-116*) Chrome number plate surround for Model C, D, LC, LD, E & F models (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
LD MK III Handlebar Mirror Clamp - Chrome (Casa Lambretta A 114)
(19-13-83*) Handlebar mirror clamp in chrome for LD MK III model. Discount is not applicable
|
|
|
|||
|
|||||
|
Lambretta Model E/F Engine Gasket Set (Casa Lambretta M 166)
(19a-31*) Engine gasket set for E & F models. (1 set required) Discount is not applicable
|
|
|
|||
|
|||||
|
C/LC Kickstart Shaft (Casa Lambretta M 156)
(19a-30*) Kickstart Shaft for C/LC models (1 required) Original Part No. 6M412. Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Lambretta Model F Oilseal Set & O-Rings (Casa Lambretta M 110/B)
(19a-29a*) Oilseal & O-ring set for F model. (1 set required) Discount is not applicable
|
|
|
|||
|
|||||
|
Lambretta Model E Oilseal Set & O-Rings (Casa Lambretta M 110)
(19a-29*) Oilseal & O-ring set for E model. (1 set required) Discount is not applicable
|
|
|
|||
|
|||||
|
C/LC Gear Bronze Slide - 1st Series (on handlebar) Casa Lambretta L 14
(19a-28*) Gear bronze slide on the handlebar for C/LC 1st Series Lambretta models fitted with steel handlebars (1 required) Original Part No. 6ST303. Discount is not applicable
|
|
|
|||
|
|||||
|
Lambretta Model A Handlebar Grips - Grey (a pair) Casa Lambretta L 42
(19a-27b*) Handlebar grips in grey for A models. (1 pair required) Original Part No. 2ST413. Discount is not applicable
|
|
|
|||
|
|||||
|
Lambretta Model A Handlebar Grips - Beige (a pair) Casa Lambretta L 44
(19a-27a*) Handlebar grips in beige for A models. (1 pair required) Original Part No. 2ST413. Discount is not applicable
|
|
|
|||
|
|||||
|
Lambretta Model E/F Handlebar Grips - Grey (a pair) Casa Lambretta L 48
(19a-27*) Handlebar grips in grey for E & F models. (1 pair required) Original Part No. 96206. Discount is not applicable
|
|
|
|||
|
|||||
|
Lambretta Model A/B Headlight Support Between the handlebar (Casa Lambretta C 319)
(19a-26*) Headlight support between the handlebar for Lambretta A & B models. (1 required) Original Part No. 2A136. Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Model E/F Fork 'C' Rubber (Casa Lambretta T 36)
(19a-25*) Fork 'C' rubber for E & F models. (2 required) Original Part No. 96022. Discount is not applicable
|
|
|
|||
|
|||||
|
Lambretta Model A/B Chrome Rear Hub Nut (with 3 slots) Casa Lambretta B 73
(19a-24*) Rear hub nut with 3 slots in chrome for Lambretta Model A & B models. (1 required) Original Part No. 2330311. Discount is not applicable
|
|
|
|||
|
|||||
|
Lambretta Model A/B Chrome Front Hub Nut (with 3 slots) Casa Lambretta B 72
(19a-23*) Front hub nut with 3 slots in chrome for Lambretta Model A & B models. (2 required) Original Part No. 2R116. Discount is not applicable
|
|
|
|||
|
|||||
|
Rear Sprint Rack (Wire Type) Chrome (Casa Lambretta A 39/B) Series 1 & 2
(13a-10e*) Rear sprint rack in chrome with 4 grey rubber plugs, for Series 1 & 2 models. Fits on the rear of the frame using the 4 existing holes. Discount is not applicable
|
|
|
|||
