|
You are at : All > FAG Bearings |
|
Drive Side Bearing (FAG 6305 C3)
(2-7*) Drive side bearing (FAG 6305 C3) for all models. (1 required) Discount is not applicable.
|
|
 |
|||
|
|||||
|
Drive Side Bearing (FAG 6305 2RSR C3) with Extra Seal
(2-7a*) For all models. Excellent quality drive side bearing for all models (FAG 6305 2RSR C3) with extra seal. Make sure that you fit the bearing with the extra seal facing towards the crankshaft. Discount is not applicable.
|
|
|
|||
|
|||||
|
GP200 Magneto Side Bearing (FAG NU2205)
(2-11*) GP200 High-Load Magneto Side Bearing (FAG NU2205) with plastic cage (Item 2-12, bearing distance piece is not required) Also available for LI Series 1, and LI/SX. Discount is not applicable.
|
|
|
|||
|
|||||
|
LI Series 1 Magneto Side Bearing (FAG N205)
(2-11b*) Series 1 & Early Series 2 Magneto Side Bearing (FAG N205) 1 required. Discount is not applicable.
|
|
|
|||
|
|||||
|
Gear Cluster Bearing 6004 (FAG)
(4-20*) For all models (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
Front Axle Bearing (FAG 6201)
(9-26*) For all models both Front Drum Brake & Front Disc Brake (2 required) Discount is not applicable.
|
|
|
|||
|
|||||
|
Disc Brake Front Axle Bearing (6201) FAG
(9a-26*) For all models fitted with a Front Drum Brake or Front Disc Brake (2 required) Discount is not applicable.
|
|
|
|||
|
|||||
|
J-Range (Cento/J-50/J-125) Drive Side Bearing (3-Speed) 17 x 47 x 14 (FAG)
(17-2-14*) For all 3-speed J-Range models (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
J-Range (Starstream 125) Drive Side Bearing (4-Speed) 20 x 47 x 18 (FAG)
(17-2-14a*) Drive side bearing for J-Range Starstream 125 (FAG) Discount is not applicable
|
|
|
|||
|
|||||
|
J-Range (Late J-50/Lui 50) Magneto Bearing (FAG)
(17-2-26a*) J-Range magneto bearing for late J-50 & Lui 50 models. (1 required) Made in Germany by FAG. Please check magneto flange before ordering as this bearing was only fitted to late models. Discount is not applicable
|
|
|
|||
|
|||||
|
J-Range (Cento/J-50/J-125/Starstream 125) End Plate Bearing (FAG)
(17-4-21a*) For all J-Range models (1 required) Manufactured by FAG. Discount is not applicable
|
|
|
|||
|
|||||
|
J-Range Front Axle Bearing (FAG 6201)
(17-10-29*) For all J-Range models (2 required) Discount is not applicable
|
|
|
|||
|
|||||
|
125 D/LD MK I Engine Ball Bearing Set (FAG)
(19-1-93*) Engine ball bearing set for 125 MK I D & LD models (1 set required) Set includes 4 x crankshaft/flywheel side, 1 x clutch, 1 x main shaft, 1 x kickstart pinion, 2 x stub axle & 2 x rear pinion FAG bearings. Discount is not applicable
|
|
|
|||
|
|||||
|
D/LD MK II & MK III Engine Ball Bearing Set (FAG)
(19-1-94*) Engine ball bearing set for MK II & MK III D/LD models (1 set required) Set includes 2 x crankshaft/flywheel side, 1 x clutch, 1 x main shaft, 1 x kickstart pinion, 2 x stub axle & 2 x rear pinion bearings. Discount is not applicable
|
|
|
|||
|
|||||
|
D/LD MK II & MK III Crankshaft/Flywheel Side Ball Bearing (FAG)
(19-2-26*) Crankshaft & flywheel side ball bearing for D/LD MK II & MK III models (2 required, 1 for each side of the crankshaft) Part No. 11110326. Discount is not applicable
|
|
|
|||
|
|||||
|
125 D/LD MK I Crankshaft/Flywheel Side Ball Bearing (FAG)
(19-2-26a*) Crankshaft & flywheel side ball bearing for 125 D & LD MK I models (4 required, 2 for each side of the crankshaft) Part No. 99091212. Discount is not applicable
|
|
|
|||
|
|||||
|
D/LD Clutch Ball Bearing (FAG)
(19-3-4*) Clutch ball bearing for all D & LD models (1 required) Part No. 15012015. Discount is not applicable
|
|
|
|||
|
|||||
|
D/LD MK II & MK III Main Shaft Ball Bearing (FAG)
(19-4-38*) Main shaft ball bearing for D/LD MK II & MK III models (1 required) Part No. 07330207. Discount is not applicable
|
|
|
|||
|
|||||
|
125 D/LD MK I Main Shaft Ball Bearing (FAG)
(19-4-38a*) Main shaft ball bearing for 125 D & LD MK I models (1 required) Part No. 15044005. Discount is not applicable
|
|
|
|||
|
|||||
|
D/LD Rear Pinion Ball Bearing (FAG)
(19-5-9*) Ball bearing for rear pinion for all D & LD models (2 required) Part No. 07330207. Discount is not applicable
|
|
|
|||
|
|||||
|
125 D/LD MK I Kick Start Pinion Ball Bearing (FAG)
(19-6-6*) Ball bearing for kickstart pinion for all 125 D/LD MK I models (1 required) Part No. 07330207. Discount is not applicable
|
|
|
|||
|
|||||
|
D/LD MK II Kick Start Pinion Ball Bearing (FAG)
(19-7-31*) Ball bearing for kick start pinion for all D/LD MK II models (1 required) Part No. 11110478. Discount is not applicable
|
|
|
|||
|
|||||
|
D/LD MK III Kick Start Pinion Ball Bearing (FAG)
(19-8-18*) Ball bearing for kick start pinion for all D/LD MK III models (1 required) Part No. 11110478. Discount is not applicable
|
|
|
|||
|
|||||
|
D/LD Front Hub Bearing (FAG)
(19-14-7*) Front hub bearing for all D & LD models (2 required) Part No. 15044005. Discount is not applicable
|
|
|
|||
|
|||||
|
Lambretta 48 Moped, Bearing for Primary Shaft (FAG)
(25-2-45*) Bearing for primary shaft for Lambretta 48 moped (1 required) Part No. 14030008. Discount is not applicable
|
|
|
|||
|
|||||
|
175LI 3-Wheeler Rear Hub Bearing (FAG)
(28-12-2*) Rear hub bearing for Innocenti 175LI & Lambro 175 3-wheelers. (2 required per hub) Part No. 15012015. Discount is not applicable
|
|
|
|||
|
|
