GP200 Engine Kit with GP Italian Race Crankshaft (Grey Sleeving)
(21-15*)![]() Convert your 125/150cc Lambretta to a 200cc Engine GP200 engine kit includes - GP200 Crankcase, GP/SX/TV Engine Mounts, GP200 Cylinder Head (SIL) GP200 Cylinder Barrel (SIL) GP200 Piston Kit (SIL) GP Electronic Ignition Kit (SIL) GP Race Crankshaft (Italian) GP200 Magneto Side Bearing (FAG NU2205) Magneto Flange (SIL) & Seal Retainer, Driveside Bearing (FAG 6305) & 4 Driveside Screws, Rolf Oilseal Kit (5 Seals) GP200 Gasket Set, Japanese Small End Bearing, 4 x Cylinder Studs, Nuts, Washers, Flywheel Nut, Flywheel Washer, Woodruff Key. All engine casings are supplied with the following; 2 x 8mm silencer studs 6 x 7mm gear flange studs (already fitted) 1 x 6mm tail pipe stud 3 x magneto flange studs 4 x rear hub bearing flange studs 1 x GP endplate 1 x gear cluster bearing bush and washer (already fitted) The GP200 Engine Kit above is sold as a special offer priced at £450.00. If you require only some of the items from the kit, you will have to pay the normal price of spares as sold separately. You cannot subtract the items which you do not require from the special kit price and pay the difference. Please note the GP200 Engine Kit is not sold as a complete or assembled engine When converting your 125/150 engine to 200cc you will need to use your 125/150 engine as a donor engine for items such as Layshaft, Gearbox assembly, Clutch assembly, Chain and Drive Sprocket, Crankcase side, Kickstart etc. Using these items from your old engine will help you reduce the costs of converting your engine to 200cc. This item is on Special Offer, discount is not applicable
|
Email a Friend Product InquiryNew Sale!The more you spend the bigger the discount…
|


