You are at : All > Sec 1 - Crankcase/Cylinder > Lambretta Crankcase/Cylinder

Page of 5  [ Back | Next ]

150cc Crankcase without Silent Block Bushes (Thicker cylinder flange) (1-1*)

The 150cc crankcase (SIL) comes with a GP endplate & has a thicker cylinder flange, which is ideal for tuning or for converting to 200cc. All new SIL crankcases come without engine number or SIL logo.

Discount is not applicable


List Price: 299.95
Our Price: 225.00
You Save: 74.95 (25%)
     Item in stock!
150cc Crankcase without Silent Block Bushes (Thicker cylinder flange)





Shock Absorber Shaft (1-2)

Shock absorber shaft for all models, except Spanish Serveta Scooters.

Our Price: 15.00      Item in stock!
Shock Absorber Shaft





Shock Absorber Shaft (Innocenti N.O.S) (1-2a*)

Shock absorber shaft for all models except Spanish Serveta models. (Innocenti New old stock)

Discount is not applicable


Our Price: 25.00     

Out of stock

Shock Absorber Shaft (Innocenti N.O.S)




Shock Absorber Shaft (Spanish Serveta N.O.S) (1-2b*)

Shock absorber shaft for Spanish Serveta models only (Spanish new old stock) Longer than Innocenti or Scooters India shock absorber shafts.

Discount is not applicable


Our Price: 30.00     

Only 4 in stock

Shock Absorber Shaft (Spanish Serveta N.O.S)





Gear Cluster Bush (1-3)

Gear cluster bush for all models. Don't forget you will need a gear cluster shim that fits behind the bush. (1 required)

Our Price: 5.95     

Out of stock

Gear Cluster Bush




Gear Cluster Bush (Spanish N.O.S) (1-3a*)

Gear cluster bush (Spanish new old stock) for all models. Don't forget you will need a gear cluster shim that fits behind the bush. (1 required)

Our Price: 8.95      Item in stock!
Gear Cluster Bush (Spanish N.O.S)





Gear Cluster Shim (1-4)

Gear cluster shim for all models. Fits behind gear cluster bush (1 required)

Our Price: 1.00      Item in stock!
Gear Cluster Shim





Gear Selector Bush (1-5)

Gear selector bush for all Series 1, 2, 3 & GP models. (1 required)

Original Part No. 19010044.


Our Price: 3.50      Item in stock!
Gear Selector Bush





Gear Selector Bush (Bronze) Innocenti N.O.S (1-5b*)

Gear selector bush in bronze as per original fitted to all Italian Series 1, 2, 3 & GP models. (1 required)

Original Part No. 19010044.

Discount is not applicable


Our Price: 15.00     

Out of stock

Gear Selector Bush (Bronze) Innocenti N.O.S




Final Drive Stud, Nut & Wavy Washer (1-6)

For all models. (4 required)

Our Price: 0.95     

Out of stock

Final Drive Stud, Nut & Wavy Washer




Final Drive Stud (Innocenti N.O.S) (1-6b*)

Final drive stud for all models. (4 required) Original Innocenti new old stock.

Our Price: 0.95      Item in stock!
Final Drive Stud (Innocenti N.O.S)





Final Drive Stud (Spanish N.O.S) (1-6c*)

Final drive stud for all models. (4 required) Original Spanish new old stock.

Our Price: 0.95      Item in stock!
Final Drive Stud (Spanish N.O.S)





Gear Flange Stud (1-7)

For all models. (6 required)

Our Price: 0.95     

Out of stock

Gear Flange Stud




Gear Flange Studs, Nuts & Washers Set (1-7a*)

For all models.

Kit includes; 6 gear flange studs (M7 x 26mm), 6 x 7mm end plate nuts (Correct Height) and 6 x 7mm end plate spring washers.

Discount is not applicable


List Price: 6.90
Our Price: 5.95
You Save: 0.95 (14%)
    

Out of stock

Gear Flange Studs, Nuts & Washers Set




Chaincase Stud, Nut & Wavy Washer (1-8)

For all models. (13 required)

Our Price: 0.95      Item in stock!
Chaincase Stud, Nut & Wavy Washer





Chaincase/Tailpipe Stud, Nut & Wavy Washer (1-8a)

For all models (only one required)

Our Price: 0.95      Item in stock!
Chaincase/Tailpipe Stud, Nut & Wavy Washer





LI Silentblock Bush (1-9a*)

Fits LI Series 1, 2 & 3, TV175 Series 2, & Spanish models.
(Two silent block bushes are required) A short engine spindle is required with this bush
(search related products)

Discount is not applicable


Our Price: 9.95      Item in stock!
LI Silentblock Bush





GP/SX Silentblock Bush (3-Holes) SIL (1-9c*)

Fits GP, SX, LI150 Special, TV175 Series 3, and TV200. A long engine spindle is required with this bush. (2 silent block bushes are required).

Discount is not applicable.


Our Price: 12.00      Item in stock!
GP/SX Silentblock Bush (3-Holes) SIL





LI Silentblock Bush (Spanish N.O.S) (1-9f*)

Silent block bush for all LI Series 1, 2 & 3, TV175 Series 2, & Spanish models. (2 required) A short engine spindle is required with this bush (Spanish new old stock)

Discount is not applicable


Our Price: 15.00     

Out of stock

LI Silentblock Bush (Spanish N.O.S)




Silencer Stud, Nut & Wavy Washer (1-10)

(Two studs, nuts and Wavy washers are required)

Our Price: 1.50      Item in stock!
Silencer Stud, Nut & Wavy Washer





Cylinder Stud (1-11)

For all models except Series 1 (Four cylinder studs are required)

Our Price: 1.95      Item in stock!
Cylinder Stud





Cylinder Stud (TS1) Made in UK (1-11a*)

For TS1 models only, longer than a standard cylinder stud (Four cylinder studs are required)

Discount is not applicable


Our Price: 2.50     

Only 2 in stock

Cylinder Stud (TS1) Made in UK





Cylinder Studs, 13mm Nuts & Washers Set (1-11b*)

For all models except Series 1 (1 set required) Set consists of 4 x cylinder studs, 3 x cylinder head nuts (13mm A/F), 1 x cylinder head distance nut (13mm A/F) & 4 wavy washers.

Discount is not applicable


List Price: 8.40
Our Price: 6.30
You Save: 2.10 (25%)
    

Out of stock

Cylinder Studs, 13mm Nuts & Washers Set




Cylinder Stud (1st oversize repair stud) M10 x 1.5mm (1-11c*)

1st oversize repair cylinder stud with M10 x 1.50mm thread at one end of the stud, used in place of a damaged M8 thread.

Our Price: 1.95     

Out of stock

Cylinder Stud (1st oversize repair stud) M10 x 1.5mm




Cylinder Stud (LI125/150 Series 1) (1-11f*)

Cylinder stud for LI125 & LI150 Series 1 models only (Four cylinder studs are required)

Our Price: 1.95     

Only 7 in stock

Cylinder Stud (LI125/150 Series 1)





Magneto Flange Stud, Nut & Wavy Washer (1-12)

For all models (3 required)

Our Price: 0.95      Item in stock!
Magneto Flange Stud, Nut & Wavy Washer





Magneto Flange Studs, Nuts & Wavy Washers (Set of 3) (1-12a*)

Set of 3 magneto flange studs, nuts & wavy washers (Set of 3) for all models (1 set required)

Discount is not applicable


Our Price: 2.50      Item in stock!
Magneto Flange Studs, Nuts & Wavy Washers (Set of 3)





Magneto Flange Stud (Spanish N.O.S) (1-12b*)

Magneto flange stud for all models (3 required) Original Spanish new old stock.

Our Price: 0.95      Item in stock!
Magneto Flange Stud (Spanish N.O.S)





GP Gearbox End Plate (SIL) (1-13*)

For GP & late SX models. Also end plate available for LI and early SX models.

Discount is not applicable


Our Price: 25.00     

Only 9 in stock

GP Gearbox End Plate (SIL)





Layshaft Endplate Bush (1-14)

For all models (1 required)

Our Price: 6.95      Item in stock!
Layshaft Endplate Bush





Layshaft Endplate Bush (Innocenti N.O.S) (1-14a*)

For all models (1 required) New old stock.

Our Price: 15.00     

Out of stock

Layshaft Endplate Bush (Innocenti N.O.S)




Layshaft Endplate Bush (Spanish N.O.S) (1-14b*)

For all models (1 required) New old stock.

Discount is not applicable.


Our Price: 9.95      Item in stock!
Layshaft Endplate Bush (Spanish N.O.S)





Dowel (End Plate) (1-15)

For all models (2 dowels are required)

Our Price: 0.95      Item in stock!
Dowel (End Plate)





7mm Nut (End Plate) (1-16)

For all models (6 required)

Our Price: 0.25      Item in stock!
7mm Nut (End Plate)





7mm Spring Washer (End Plate) (1-17)

For all Models (6 required)

Our Price: 0.10      Item in stock!
7mm Spring Washer (End Plate)





6mm Grease Nipple (1-18)

For all Models as per original design.

Our Price: 2.50      Item in stock!
6mm Grease Nipple





Cluster Needle Cage (INA) (1-19*)

For all Models (Manufactured by INA)

Discount is not applicable


Our Price: 6.95      Item in stock!
Cluster Needle Cage (INA)





Rear Hub Bearing Retaining Plate (1-20)

For all Models (1 required)

List Price: 4.00
Our Price: 3.00
You Save: 1.00 (25%)
     Item in stock!
Rear Hub Bearing Retaining Plate





Rear Hub Bearing Retaining Plate (Innocenti N.O.S) (1-20a*)

For all models (Original old stock) Innocenti.

Discount is not applicable


Our Price: 9.95     

Out of stock

Rear Hub Bearing Retaining Plate (Innocenti N.O.S)




Rear Hub Bearing Retaining Plate (Spanish N.O.S) (1-20b*)

Rear hub bearing retaining plate for all models (Spanish original old stock) 1 required. (1 required)

Discount is not applicable


Our Price: 5.95      Item in stock!
Rear Hub Bearing Retaining Plate (Spanish N.O.S)





Rear Hub Bearing Retaining Plate Washer (1-21)

For all Models (1 required)

Our Price: 1.50      Item in stock!
Rear Hub Bearing Retaining Plate Washer





Rear Hub Bearing Retaining Plate Washer (Spanish N.O.S) (1-21a*)

Rear hub bearing retaining plate washer for all models (Spanish original old stock) 1 required.

Discount is not applicable


Our Price: 3.00      Item in stock!
Rear Hub Bearing Retaining Plate Washer (Spanish N.O.S)





LI/SX Rear Brake Shoes Pivot Pin (Spanish N.O.S) (1-24*)

Rear brake shoes pivot pin for all LI/SX Models except GP (2 required) GP brake shoe pivot pin can be used instead of LI/SX brake shoe pivot pin as long as you us a GP brake cam & brake shoe locating spring.

Our Price: 3.95      Item in stock!
LI/SX Rear Brake Shoes Pivot Pin (Spanish N.O.S)





GP Brake Shoes Pivot Pin (1-24a)

For GP models (2 required) for Crankcase. Can be used in place of LI/SX brake shoe pivot pin.

Our Price: 2.95      Item in stock!
GP Brake Shoes Pivot Pin





LI/SX Rear Brake Shoes Pivot Pin (Innocenti N.O.S) (1-24b*)

Rear brake shoes pivot pin for all LI/SX Models except GP (2 required)

GP brake shoe pivot pin can be used instead of LI/SX brake shoe pivot pin as long as you us a GP brake cam & brake shoe locating spring.


Our Price: 9.95     

Out of stock

LI/SX Rear Brake Shoes Pivot Pin (Innocenti N.O.S)




Engine Buffer (1-25)

For all Models (1 required)

Our Price: 2.95      Item in stock!
Engine Buffer





Engine Buffer (Innocenti N.O.S) (1-25a*)

Engine buffer for all models (1 required) Innocenti new old stock.

Discount is not applicable


Our Price: 5.95     

Out of stock

Engine Buffer (Innocenti N.O.S)




Engine Buffer (API) (1-25b)

Engine buffer manufactured by API India, can be used for all Models (1 required)

Our Price: 2.95      Item in stock!
Engine Buffer (API)





Engine Buffer (Spanish N.O.S) (1-25c*)

Engine buffer for all models (1 required)Spanish new old stock.

Discount is not applicable


Our Price: 5.95      Item in stock!
Engine Buffer (Spanish N.O.S)





Engine Buffer Washer (1-26)

For all Models (1 required)

Our Price: 2.00      Item in stock!
Engine Buffer Washer





Page of 5  [ Back | Next ]

Browse Categories

Twitter

FaceBook

LCGB Membership Form LCGB Authentication Form