|
You are at : All > Sec 2 - Crankshaft/Piston > Lambretta Crankshaft/Piston |
|
GP200 Crankshaft (SIL)
(2-1*) SIL GP200 Crankshaft. Before being dispatched each crankshaft is thoroughly examined for alignment, balance, drive side sleeve splines and flywheel nut thread. Discount is not applicable.
|
|
 |
|||
|
|||||
|
GP200 Crankshaft (Italian)
(2-1a*) Italian GP200 Crankshaft manufactured by Meceur in Italy. Discount is not applicable.
|
|
|
|||
|
|||||
|
SX200 Crankshaft (Italian)
(2-1b*) Italian SX200 Crankshaft (manufactured by Meceur in Italy) Before being dispatched each crankshaft is thoroughly examined for alignment, balance, drive side sleeve splines and flywheel nut thread. Discount is not applicable.
|
|
|
|||
|
|||||
|
LI/SX Crankshaft (Italian)
(2-1c*) Italian LI/SX Crankshaft suitable for all Series 2 LI125 & LI150, Series 3 LI125, LI150, SX150, LI150S and SX200 models (manufactured by Meceur in Italy) Discount is not applicable.
|
|
|
|||
|
|||||
|
TV175 Crankshaft (Italian)
(2-1d*) Italian TV175 Crankshaft (manufactured by Meceur in Italy) Before being dispatched each crankshaft is thoroughly examined for alignment, balance, drive side sleeve splines and flywheel nut thread. Discount is not applicable.
|
NO IMAGE |
|
|||
|
|||||
|
GP Race Crank (Italian)
(2-1e*) Italian GP200 Race Crankshaft (manufactured by Meceur in Italy) Suitable for mildly tuned engines. Discount is not applicable.
|
|
|
|||
|
|||||
|
GP150 Crankshaft (SIL)
(2-1f*) SIL GP150 Crankshaft Other Crankshafts available GP Race Crank (Italian) SX200 (Italian) LI/SX (Italian) & TV175 (Italian) Discount is not applicable.
|
|
|
|||
|
|||||
|
GP200 Crankshaft (SIL) fitted with Japanese Big End Bearing
(2-1g*) Limited edition of 500 Scooters India GP200 Crankshafts fitted with a Japanese big end bearing. Manufactured by Scooters India for Scooter Restorations. Discount is not applicable.
|
|
|
|||
|
|||||
|
Small End Roller Bearing (INA)
(2-2*) For all models (Manufactured by INA, Germany) Also available small end bush for Series 1 & 2 and Japanese small end roller bearing (1 required) Discount is not applicable.
|
|
|
|||
|
|||||
|
Series 1 & 2 Small End Bush
(2-2a*) Available for original series 1 & early series 2 crankshafts. (1 required) A special tool is required to fit the small end bush. Discount is not applicable.
|
|
|
|||
