|
You are at : All > Sec 17 - Lambretta J-Range > Lambretta J-Range Tools |
|
J-Range Magneto Flange Extractor (20787)
(17-15-1*) For all J-range and Vega models. For extracting magneto flange Discount is not applicable.
|
NO IMAGE |
 |
|||
|
|||||
|
J-Range Crankshaft Magneto Side Track Extractor (70645)
(17-15-2*) J-range crankshaft magneto side track extractor used to remove bearing track from crankshaft. Discount is not applicable.
|
|
|
|||
|
|||||
|
J-Range Engine Silent Block Extractor (76891)
(17-15-3*) Used for extracting and fitting silent block bushes fitted to crankcase on late models i.e. Starstream 125, Late J50. Discount is not applicable.
|
|
|
|||
|
|||||
|
J-Range Gear Cluster Bush Extractor (70653)
(17-15-4*) Used for extracting gear cluster bush from crankcase for all J-range models. Discount is not applicable.
|
|
|
|||
|
|||||
|
J-Range Crankshaft Ball Bearing Extractor/Fitting Tool & Magneto Bearing Extractor (70650)
(17-15-5*) For all J-range models. Used to extract and fit drive side bearing. Discount is not applicable.
|
|
|
|||
|
|||||
|
J-Range Layshaft Bearing Extractor/Fitting Tool (70651)
(17-15-6*) For all J-range models. Used to extract and fit layshaft bearing. Discount is not applicable.
|
|
|
|||
|
|||||
|
J-Range Crankshaft Fitting Tool (70658)
(17-15-7*) For all J-range models. Used to draw crankshaft into crankcase. Discount is not applicable.
|
|
|
|||
|
|||||
|
J-Range Inner Clutch Bell Housing Extractor (70649)
(17-15-8*) For all models. For removing inner clutch bell (Part No. 70649) Tool 70649 is an later improved version of Innocenti inner clutch bell housing extractor tool, part No. 59328. Discount is not applicable.
|
|
|
|||
|
|||||
|
J-Range Cento Piston Ring Pliers (49149/1)
(17-15-9*) For fitting Cento (51.0mm) piston rings only (Part No. 49149/1) Discount is not applicable.
|
NO IMAGE |
|
|||
|
|
