Short Engine Mounting Spindle (Stainless Steel)
(1-54e*)
Short engine spindle in stainless steel for all LI Series 1, 2 & 3 and Early Spanish models. (Two LI silent block bushes are required with this spindle)
Discount is not applicable
|
Our Price: £9.95
|
|
Only 2 in stock
|
|
|
|
|
|
Kick Start Lever Bolt (Long) & Nut (S/S)
(4-3b)
M7 x 40mm bolt, nut and washer originally fitted to early models (stainless steel) Please check kick start pedal thread for length of bolt and diameter of bolt required. Some kick start pedals may require a shorter bolt.
|
Our Price: £1.20
|
|
Item in stock!
|
|
|
|
|
|
LI/TV/SX Flywheel Cover (Polished Stainless Steel)
(5-5g*)
Polished stainless steel flywheel cover for all LI, TV, Series 1, 2, 3, & SX flywheels with standard length fins.
Discount is not applicable
|
Our Price: £39.00
|
|
Only 4 in stock
|
|
|
|
|
|
Petrol Tank (Polished Stainless Steel)
(6b-47h*)
Standard petrol tank in polished stainless steel for all models. (1 required)
Discount is not applicable
|
Our Price: £100.00
|
|
Only 1 in stock
|
|
NO
IMAGE
|
|
|
|
Petrol Tank Straps with Trunnions (Stainless Steel)
(6b-48b*)
Petrol tank straps with trunnions in polished stainless steel for all models (1 set required) Set consists of 2 x petrol tank straps, 2 x petrol tank screws and trunnions.
|
Our Price: £27.95
|
|
Only 2 in stock
|
|
|
|
|
|
Airscoop Cover Screw & Washer (Set) S/S
(6b-51a*)
Airscoop cover screws & washers (Fig 51 & 52) in stainless steel for all models (1 set required)
|
Our Price: £1.20
|
|
Item in stock!
|
|
|
|
|
|
Air Box Spring (Stainless Steel) Made in UK
(6b-69a*)
Air box spring in stainless steel for all series 3 & GP models (1 required)
Discount is not applicable
|
Our Price: £15.00
|
|
Only 8 in stock
|
|
|
|
|
|
Air Filter Bolt, Fibre Washer & Nut (Stainless Steel) Made in UK
(6b-83a*)
Air filter bolt, fibre washer & nut in stainless steel for all Series 3 & GP models (1 required)
Discount is not applicable
|
Our Price: £9.95
|
|
Only 9 in stock
|
|
|
|
|
|
60's Replica Twin Tailpipe Exhaust (Stainless Steel) No U-Bend
(6b-99o*)
60's replica twin tailpipe exhaust in polished stainless steel for Series 2, 3 GP & Serveta models. Stamped BASU 193/T2 on exhaust bracket.
Discount is not applicable
List Price: £120.00
Our Price: £80.00
You Save: £40.00 (33%)
|
|
Only 3 in stock
|
|
|
|
|
|
Exhaust 8mm Bolt/Spring Washer & Washer
(6b-109)
For later Series 3 models after 1964 (stainless steel) 1 required.
|
Our Price: £0.50
|
|
Item in stock!
|
|
|
|
|
|
GP Stainless Steel Locking Petrol Cap Cover with Keys
(7-2f*)
GP Locking petrol cap cover in stainless steel. Fits all late Italian and Indian GP models
Also available - Series 1, 2 & 3 Petrol flap in steel, LI Series 1, 2 & 3 stainless steel locking petrol flap cover.
|
Our Price: £9.95
|
|
Item in stock!
|
|
|
|
|
|
Tool Box Cover Pin Series 3 (Stainless Steel)
(7-5b*)
Toolbox cover pin in stainless steel for Series 3 models (1 required)
|
Our Price: £5.00
|
|
Only 8 in stock
|
|
|
|
|
|
Tool Box Cover Pin Series 1 & 2 (Stainless Steel)
(7-5c*)
Toolbox cover pin in stainless steel for Series 1 & 2 models (1 required)
|
Our Price: £5.00
|
|
Only 9 in stock
|
|
|
|
|
|
Lock Fitting Screw, Washer & Nuts (a set) S/S
(7-8a)
For all models (one set required) Set consists of 2 x M3 Socket Button screws, 2 washers and 2 nuts in Stainless Steel.
|
Our Price: £0.60
|
|
Item in stock!
|
|
|
|
|
|
Rear Suspension Nut (Stainless Steel)
(7-17a*)
Rear suspension nut in stainless steel for all models (2 required)
Discount is not applicable
|
Our Price: £1.50
|
|
Item in stock!
|
|
|
|
|
|
Rear Suspension Washer (Stainless Steel)
(7-18a*)
Rear suspension washer in stainless steel for all models (2 required)
Discount is not applicable
|
Our Price: £0.60
|
|
Item in stock!
|
|
|
|
|
|
Series 3 Rear O/S Footboard Support (Stainless Steel)
(7-19c*)
Series 3 off side footboard support in stainless steel for all Series 3 & GP models (1 required)
|
Our Price: £10.95
|
|
Out of stock
|
|
|
|
|
|
Series 1 & 2 Support Bolts, Nuts & Washers (S/S)
(7-20a)
For all Series 1 & 2 models. Set includes 2 x 8mm bolts, 2 x 8mm nuts & 4 x 8mm washers (Stainless Steel)
|
Our Price: £1.20
|
|
Item in stock!
|
|
|
|
|
|
Stand Spring (Stainless Steel)
(7-26c*)
Stand spring in stainless steel for all models except very late Indian GP150 & GP200 (1 required)
|
Our Price: £9.95
|
|
Only 5 in stock
|
|
|
|
|
|
Stand Bolt, Nuts & Washers (Set) S/S
(7-34)
For all Late Series 2 & Series 3 Splash Plate (Set includes 2 Stainless Steel bolts, 2 nuts & 4 washers)
|
Our Price: £1.50
|
|
Item in stock!
|
|
|
|
|
|
Series 1 & Early Series 2 Splash Plate Bolt Set (S/S)
(7-34a)
For all Series 1 & Early Series 2 Splash Plates (8 Stainless steel bolts, washers & nuts)
|
Our Price: £3.00
|
|
Item in stock!
|
|
|
|
|
|
Stand Bolt, Nuts & Washers (Set) Late SIL (S/S)
(7-34b)
For Late Scooters India GP's models and for use when welding a new stand cross member to the frame (set includes 2 Stainless Steel bolts, 2 nuts & 4 washers)
|
Our Price: £1.50
|
|
Item in stock!
|
|
|
|
|
|
Fork Link Disc/Drum Brake Damper Stud (Stainless Steel) 7mm Longer for Modern Dampers
(8-75a*)
For all TV175 Series 2, TV175 Series 3, TV200, SX200 & GP200 models in Stainless Steel (2 required) 7mm longer thread than original length to be able to fit modern front dampers.
|
Our Price: £2.95
|
|
Only 10 in stock
|
|
|
|
|
|
Fork Link Pivot Bolt, Nut & Washer (Series 3 & GP) Stainless Steel
(8-78d*)
For all models in stainless steel. Originally fitted to Series 3 & GP can be used for Series 1 & 2 (2 required)
Also available: Fork Link Pivot Bolt & Bush Set.
|
Our Price: £4.50
|
|
Item in stock!
|
|
|
|
|
|
Fork Link Pivot Bolt & Bush Set (Series 3 & GP) Stainless Steel
(8-78e*)
For all models in stainless steel. Originally fitted to Series 3 & GP can be used for Series 1 & 2 (1 set required)
|
Our Price: £18.95
|
|
Only 4 in stock
|
|
|
|
|
|
Fork Bolt in Fork Buffer Bolts & Washers Kit (S/S)
(8-80d)
For Series 1, 2 & early Series 3 models. Set includes 8 Stainless Steel M6 Bolts & 8 Stainless Steel Washers.
|
Our Price: £2.50
|
|
Only 7 in stock
|
|
|
|
|
|
Fork Cable Clip (Polished Stainless Steel)
(8-86a*)
Fork cable clip in polished stainless steel for all models post-1963 (1 required)
Discount is not applicable
|
Our Price: £5.00
|
|
Only 1 in stock
|
|
|
|
|
|
Fork Link Pivot Bolt Washer (Stainless Steel)
(8-91a*)
Fork link pivot washer for fork link bolt. (2 required for Series 1 & 2 - 1 required for Series 3)
|
Our Price: £0.50
|
|
Item in stock!
|
|
|
|
|
|
Upper Damper Bolts, Nuts & Washers (Set)
(8-97)
For all upper damper brackets. Kit includes 2 x M6 Stainless Steel Bolts, 2 x Stainless Nuts & 2 x Stainless Steel washers.
|
Our Price: £1.20
|
|
Item in stock!
|
|
|
|
|
|
Rear Brake Arm Circlip (Stainless Steel)
(9-9a*)
10mm external circlip in stainless steel for all models (1 required)
|
Our Price: £0.25
|
|
Item in stock!
|
|
|
|
|
|
Front Axle Nut (Stainless Steel) Made in the UK
(9-14a*)
For all models (2 required) Stainless Steel (Made in the UK).
Will need polishing.
|
Our Price: £4.95
|
|
Item in stock!
|
|
|
|
|
|
Front Axle Washer (Stainless Steel) Made in the UK
(9-15a*)
For all models (2 required)
List Price: £1.00
Our Price: £0.80
You Save: £0.20 (20%)
|
|
Item in stock!
|
|
|
|
|
|
Front Axle Washer (Polished Stainless Steel) Casa Lambretta B 118
(9-15b*)
For all models (2 required)
Discount is not applicable
|
Our Price: £1.00
|
|
Only 1 in stock
|
|
|
|
|
|
Front Axle Inner Nut (Stainless Steel) Made in the UK
(9-17a*)
For all models fitted with a front drum brake (2 required) Only 1 required for Disc Brake Assembly. Stainless Steel (Made in the UK).
Will need polishing.
|
Our Price: £1.20
|
|
Item in stock!
|
|
|
|
|
|
Front Axle Inner Washer (Stainless Steel) Made in the UK
(9-18a*)
For all models fitted with a Front Drum Brake. Not required for Disc Brake Assembly (1 required) Stainless Steel (Made in the UK).
Will need polishing.
|
Our Price: £0.60
|
|
Out of stock
|
|
|
|
|
|
Rear Hub Nut (Stainless Steel) Made in the UK
(9-31b*)
Rear hub nut for all models (1 required) Stainless Steel (Made in the UK).
Will need polishing.
|
Our Price: £6.25
|
|
Item in stock!
|
|
|
|
|
|
Rear Hub Lock Washer, Allen Screw & Washer (Stainless Steel) Made in UK
(9-32a*)
Rear hub lock washer, allen screw & washer made in stainless steel for all Series 3 & GP Rear Hubs (1 set required) Made in the UK.
Will need polishing.
|
Our Price: £6.95
|
|
Item in stock!
|
|
|
|
|
|
Rim/Hub Wavy Washer (S/S)
(9-34)
For all models (4 required per wheel rim) Stainless steel
|
Our Price: £0.10
|
|
Item in stock!
|
|
|
|
|
|
Wheel Rim Nut & Washer Set (Stainless Steel) Made in the UK
(9-35b*)
Can be used for all Series 1, 2, 3, GP, Indian & Spanish models (1 set required per wheel rim) Set consists of 4 wheel rim nyloc nuts (with white nyloc) 8 wavy washers, 4 domed rim/hub nuts & 4 flat washers used behind domed rim/hub nuts.
List Price: £7.80
Our Price: £5.84
You Save: £1.96 (25%)
|
|
Item in stock!
|
|
|
|
|
|
Wheel Rim 13mm Nyloc Nut with White Nyloc (Stainless Steel)
(9-56b)
For Series 3 & GP models (4 required per wheel rim)
|
Our Price: £0.40
|
|
Item in stock!
|
|
|
|
|
|
Wheel Rim Wavy Washer (S/S)
(9-57)
For all models (4 required per wheel rim) Stainless steel
|
Our Price: £0.10
|
|
Item in stock!
|
|
|
|
|
|
Disc Brake Back Plate Stud (Stainless Steel)
(9a-19a*)
For all Italian models fitted with a Disc Brake Assembly. TV175, TV200, SX200 Series 3 & GP200 (1 required)
|
Our Price: £3.95
|
|
Item in stock!
|
|
|
|
|
|
Disc Brake Adjustment Screw Tab Washer (Stainless Steel)
(9a-23a*)
Disc brake tab washer in stainless steel for adjustment screw for all Italian models fitted with a Disc Brake Assembly. TV175, TV200, SX200 Series 3 & GP200 (1 required)
Discount is not applicable
|
Our Price: £3.50
|
|
Only 2 in stock
|
|
|
|
|
|
Disc Brake Rim/Hub Wavy Washer (S/S)
(9a-34)
For all models fitted with a Front Drum Brake or Front Disc Brake (4 required) Stainless Steel.
|
Our Price: £0.10
|
|
Item in stock!
|
|
|
|
|
|
Disc Brake Wheel Rim Wavy Washer (S/S)
(9a-57)
For all models fitted with a Front Drum Brake or Front Disc Brake (4 required) Stainless Steel.
|
Our Price: £0.10
|
|
Item in stock!
|
|
|
|
|
|
GP Rear Light Lens Screw (CEV) Stainless Steel
(10-5)
Rear light lens screw in stainless steel with slotted pan head for original Italian CEV rear light units fitted to Italian GP models (2 required)
|
Our Price: £0.50
|
|
Item in stock!
|
|
|
|
|
|
Series 3 Rear Light Casting Screw, Nut & Washer (S/S)
(10-11*)
For all Series 3 models.
Used to fasten the rear light unit to the frame (2 required) Stainless Steel.
|
Our Price: £1.60
|
|
Item in stock!
|
|
|
|
|
|
LI/TV Headlight Rim Screw & Cup Washer (Stainless Steel)
(10-22b*)
For LI/TV Series 1 (4 required) For Series LI/TV 2 & LI Series 3 models (3 required) Stainless Steel.
|
Our Price: £0.30
|
|
Out of stock
|
|
|
|
|
|
TV/SX Headlight Rim Screw (Cross Head) Stainless Steel
(10-22d*)
Headlight rim screw in stainless steel for Italian Series 3 SX150, TV175, TV200, SX200 & LI150S models (4 required)
|
Our Price: £0.50
|
|
Item in stock!
|
|
NO
IMAGE
|
|
|
|
Light Switch Screw
(11-27)
For all models (2 required)
|
Our Price: £0.30
|
|
Item in stock!
|
|
|
|
