|
You are at : All > Sec 16 - Workshop Tools > Lambretta Tools |
|
Fork Compressor
(16-1*) For all Series 1, 2, 3 & GP models. An essential tool for compressing the fork springs and removing the fork links Discount is not applicable.
|
|
 |
|||
|
|||||
|
Clutch Holding Tool
(16-2*) For all models. Used when locking or unlocking the clutch nut securing the clutch inner bell. Discount is not applicable.
|
|
|
|||
|
|||||
|
GP/Ll/SX/AF Flywheel Holding Tool (2 & 3 Prong)
(16-3*) For all Series 1, 2, 3, GP & Serveta models. Discount is not applicable.
|
|
|
|||
|
|||||
|
Flywheel Holding Tool (1 Prong)
(16-3a*) For all Series 1, 2, 3, GP & Serveta models. Discount is not applicable.
|
NO IMAGE |
|
|||
|
|||||
|
Crankshaft Driveside Pulling Sleeve
(16-4*) For all Series 1, 2, 3, GP & Serveta models. Discount is not applicable.
|
NO IMAGE |
|
|||
|
|||||
|
Final Drive Pulling Sleeve
(16-5*) For all Series 1, 2, 3, GP & Serveta models Discount is not applicable.
|
NO IMAGE |
|
|||
|
|||||
|
Large Magneto Oilseal Drift
(16-6*) For all Series 2, 3, GP & Serveta models Discount is not applicable.
|
|
|
|||
|
|||||
|
Fork Link Pivot Bush Drift
(16-7*) For all Series 1, 2, 3, GP & Serveta models. Used to remove nylon fork bush and steel fork bush from fork link Discount is not applicable.
|
|
|
|||
|
|||||
|
Rear Brake Pedal Bush Drift
(16-8*) For all Series 1, 2, 3, GP & Serveta models Discount is not applicable.
|
|
|
|||
|
|||||
|
End Plate Bearing Drift
(16-9*) For all Series 1, 2, 3, GP & Serveta models. Discount is not applicable.
|
|
|
|||
