You are at : All > Scooters India Ltd (SIL)

Page of 8  [ Back | Next ]

150cc Crankcase without Silent Block Bushes (Thicker cylinder flange) (1-1*)

The 150cc crankcase (SIL) comes with a GP endplate & has a thicker cylinder flange, which is ideal for tuning or for converting to 200cc. All new SIL crankcases come without engine number or SIL logo.

List Price: 299.95
Our Price: 225.00
You Save: 74.95 (25%)
     Item in stock!
150cc Crankcase without Silent Block Bushes (Thicker cylinder flange)





GP/SX Silentblock Bush (3-Holes) SIL (1-9c*)

Fits GP, SX, LI150 Special, TV175 Series 3, and TV200. A long engine spindle is required with this bush. (2 silent block bushes are required)

Our Price: 12.00     

Out of stock

GP/SX Silentblock Bush (3-Holes) SIL




Silencer Stud, Nut & Wavy Washer (1-10)

(Two studs, nuts and Wavy washers are required)

Our Price: 1.50      Item in stock!
Silencer Stud, Nut & Wavy Washer





GP Gearbox End Plate (SIL) (1-13*)

For GP & late SX models. Also end plate available for LI and early SX models.

Our Price: 25.00     

Only 2 in stock

GP Gearbox End Plate (SIL)





GP Crankcase Cover (SIL) (1-27*)

For all GP models. Comes with both kick start bushes already fitted (1 required)

List Price: 100.00
Our Price: 90.00
You Save: 10.00 (10%)
     Item in stock!
GP Crankcase Cover (SIL)





8mm Silencer Wavy Washer (1-39)

For all models except Series 1 & Early Series 2 (2 required)

Our Price: 0.10      Item in stock!
8mm Silencer Wavy Washer





GP150 Cylinder (57.00mm) SIL (1-43a*)

Standard SIL GP150 Cylinder (57.00mm Bore) 1 required.

Our Price: 55.00      Item in stock!
GP150 Cylinder (57.00mm) SIL





GP200 Cylinder (66.00mm) SIL (1-43d*)

SIL GP200 Cylinder factory tuned stage 4 standard 66.0mm Cylinder (1 required)

Our Price: 60.00     

Out of stock

GP200 Cylinder (66.00mm) SIL




GP150 Cylinder, Piston Assembly & Head (SIL) (1-43e*)

SIL GP150 Standard Cylinder, Mahle Piston assembly with chrome plated cast iron rings and GP150 Cylinder Head.

Our Price: 120.00     

Out of stock

GP150 Cylinder, Piston Assembly & Head (SIL)




GP200 Cylinder, Piston Assembly & Head (SIL) (1-43f*)

SIL GP200 factory tuned stage 4 standard 66.0mm Cylinder, with Mahle Piston Assembly & SIL GP200 Cylinder Head.

Our Price: 120.00     

Out of stock

GP200 Cylinder, Piston Assembly & Head (SIL)




GP150 Cylinder, Borgo Piston Assembly & Head (SIL) (1-43p*)

SIL GP150 Standard Cylinder, Borgo Piston assembly (Italian) with chrome plated cast iron rings and SIL GP150 Cylinder Head.

Our Price: 130.00     

Only 2 in stock

GP150 Cylinder, Borgo Piston Assembly & Head (SIL)





150cc Cylinder Head (SIL) (1-48a*)

SIL GP150 Cylinder Head. For all 150cc Cylinders (1 required)

Our Price: 30.00      Item in stock!
150cc Cylinder Head (SIL)





200cc Cylinder Head (SIL) (1-48d*)

SIL GP200 Cylinder Head for all 200cc Cylinders. Ideal for tuning (1 required)

Our Price: 30.00      Item in stock!
200cc Cylinder Head (SIL)





Engine Mounting Cone (TV/SX/GP) (1-53*)

For all models fitted with SX/GP engine silentblock bushes and a long engine mount spindle (2 cones required)

Our Price: 3.95     

Out of stock

Engine Mounting Cone (TV/SX/GP)




Long Engine Mounting Spindle (1-54*)

Fits GP, SX, LI150 Special, TV175 Series 3, and TV200

2 GP/SX silent block bushes are required with this spindle (1 required)


Our Price: 9.95     

Out of stock

Long Engine Mounting Spindle




GP200 Crankshaft (SIL) (2-1*)

SIL GP200 Crankshaft. Before being dispatched each crankshaft is thoroughly examined for alignment, balance, drive side sleeve splines and flywheel nut thread.

List Price: 79.95
Our Price: 59.95
You Save: 20.00 (25%)
    

Out of stock

GP200 Crankshaft (SIL)




GP150 Crankshaft (SIL) (2-1f*)

Scooters India GP150 Crankshaft for use with a NU205 magneto flange bearing (Not a NU2205 intended for a GP200 crankshaft)

List Price: 79.95
Our Price: 59.95
You Save: 20.00 (25%)
    

Out of stock

GP150 Crankshaft (SIL)




GP200 Crankshaft (SIL) fitted with Japanese Big End Bearing (2-1g*)

Limited edition of 500 Scooters India GP200 Crankshafts fitted with a Japanese big end bearing. Manufactured by Scooters India for Scooter Restorations.

List Price: 79.95
Our Price: 59.95
You Save: 20.00 (25%)
    

Out of stock

GP200 Crankshaft (SIL) fitted with Japanese Big End Bearing




Bearing Flange (Alloy) (2-5)

For all models. SIL alloy bearing flange plate. Originally fitted to late Italian GP's and Indian GP models (1 required)

Our Price: 3.00      Item in stock!
Bearing Flange (Alloy)





LI/SX/GP Magneto Side Bearing NU205 (SIL) (2-11c*)

Original suppliers to SIL. Excellent value for money, 100's sold, ideal for standard GP125, GP150, TV175, LI125, LI150 & SX150 crankshafts. For all models except LI Series 1, early Series 2 & GP200.

List Price: 20.00
Our Price: 15.00
You Save: 5.00 (25%)
     Item in stock!
LI/SX/GP Magneto Side Bearing NU205 (SIL)





150cc Piston Assembly 57.0mm (SIL Mahle +) (2-18e-7b*)

For all late series 2, 3 & GP models. Made in India by Mahle, original suppliers to Scooters India. (Grade +)

Our Price: 34.95      Item in stock!
150cc Piston Assembly 57.0mm (SIL Mahle +)





150cc Piston Assembly 57.0mm (SIL Mahle ++) (2-18e-7c*)

For all late series 2, 3 & GP models. Made in India by Mahle, original suppliers to Scooters India. (Grade ++)

Our Price: 34.95      Item in stock!
150cc Piston Assembly 57.0mm (SIL Mahle ++)





150cc Piston Assembly 57.4mm (SIL Mahle) (2-18e-8*)

For all late series 2, 3 & GP models. For 2nd oversize 150cc cylinders. Made India by Mahle, original suppliers to Scooters India.

Our Price: 34.95      Item in stock!
150cc Piston Assembly 57.4mm (SIL Mahle)





150cc Piston Assembly 57.4mm (SIL Usha) (2-18e-8a*)

For all late series 2, 3 & GP models. 2nd oversize 150cc cylinders. Comes with piston rings (2 ring set) 2 x circlips and Gudgeon Pin. Made in India by Usha, original suppliers to Scooters India in the 1970's.

Our Price: 34.95      Item in stock!
150cc Piston Assembly 57.4mm (SIL Usha)





150cc Piston Assembly 57.6mm (SIL Mahle) (2-18e-9*)

For all late series 2, 3 & GP models. For 3rd oversize 150cc cylinders. Made in India by Mahle, original suppliers to Scooters India.

Our Price: 34.95      Item in stock!
150cc Piston Assembly 57.6mm (SIL Mahle)





200cc Piston Assembly 66.0mm (Mahle -) (2-18k-1*)

Standard 200cc (66.0mm) piston (Grade -) Comes with cast iron piston rings (2 chrome and 1 plain, 3 ring set) 2 x circlips and Gudgeon Pin. Made in India by Mahle, original suppliers to Scooters India.

Our Price: 34.95     

Out of stock

200cc Piston Assembly 66.0mm (Mahle -)




LI/SX/GP Clutch Sprocket 46 tooth (3-17*)

For all models except GP200. Intended for use with a bronze clutch bush as the internal surface of the clutch sprocket is not designed for use with a needle roller bearing. Ideally for use with a 15 tooth front drive sprocket and a 80 pitch chain.

Our Price: 35.00      Item in stock!
LI/SX/GP Clutch Sprocket 46 tooth





GP200 Clutch Sprocket 47 tooth (3-17a*)

For GP200 model only. Can be used in any other Lambretta but with a 18 tooth front drive sprocket, an 82 link chain and a GP200 lower chain guide.

Our Price: 35.00      Item in stock!
GP200 Clutch Sprocket 47 tooth





Clutch Inner Bell (SIL) (3-18*)

Clutch inner bell for all Series 1, 2, 3 & GP models.

Our Price: 30.00      Item in stock!
Clutch Inner Bell (SIL)





Chain 80 Pitch (3-23)

For all models except GP200. Also available Italian 80 pitch chain (1 required)

Our Price: 19.95     

Out of stock

Chain 80 Pitch




GP Kick Start Shaft (SIL) (4-12)

Scooters India GP Kick Start Shaft

Also available GP Italian, LI/SX, LI Series 1 & 2.


Our Price: 30.00      Item in stock!
GP Kick Start Shaft (SIL)





GP150 & GP200 1st Gear (SIL) 50 Teeth (19430008) (4-22a*)

GP150 & GP200 1st gear (Scooters India Part No. 19430008) - (50 Teeth)

Also available as part of a complete SIL GP200 or GP150 Gear Box.


Our Price: 35.00     

Out of stock

GP150 & GP200 1st Gear (SIL) 50 Teeth (19430008)




LI125 Series 1, 2 & 3 1st Gear (51 Teeth) SIL (4-22c*)

LI125 Series 1, 2 & 3 1st gear (51 Teeth) Scooters India (1 required)

Our Price: 35.00     

Out of stock

LI125 Series 1, 2 & 3 1st Gear (51 Teeth) SIL




GP150/GP200 2nd Gear (SIL) 42 Teeth (19430009) (4-23*)

GP150 & GP200 2nd gear (SIL) Part no. 19430009 - (42 Teeth)

Also available as part of a complete SIL GP200 or GP150 Gear Box.


Our Price: 30.00      Item in stock!
GP150/GP200 2nd Gear (SIL) 42 Teeth (19430009)





GP150 2nd Gear (Vijay Super MKII Late SIL) 41 Teeth (19830009) (4-23a)

GP150 2nd Gear (Vijai Super MKII Late SIL) Part no. 19830009 - (41 Teeth) same as LI150 Special Pacemaker 2nd Gear.

Also available as part of a complete SIL GP150 Gear Box.


Our Price: 30.00      Item in stock!
GP150 2nd Gear (Vijay Super MKII Late SIL) 41 Teeth (19830009)





GP150 & GP200 3rd Gear (SIL) 38 Teeth (22030011) (4-24a*)

GP150 & GP200 3rd Gear (SIL) Part no. 22030011 - (38 Teeth)

Also available as part of a complete SIL GP200 or GP150 Gear Box.


Our Price: 30.00     

Only 10 in stock

GP150 & GP200 3rd Gear (SIL) 38 Teeth (22030011)





GP150 3rd Gear (Vijay Super MKII Late SIL) 37 Teeth (19030005) (4-24b)

SIL 3rd Gear fitted to Vijay Super MKII mid 1980's Part No. 19030005 also the same as LI150 Series 1, 2 & 3.

Our Price: 30.00      Item in stock!
NO
IMAGE






GP150/SX150/LI125/LI150/LI150S 4th Gear (SIL) 35 Teeth (19130017) (4-25a)

GP150/SX150/LI125/LI150/LI150S 4th Gear (35 Teeth) Part No. 19130017.

List Price: 25.00
Our Price: 20.00
You Save: 5.00 (20%)
     Item in stock!
GP150/SX150/LI125/LI150/LI150S 4th Gear (SIL) 35 Teeth (19130017)





GP200 4th Gear (SIL) 36 Teeth (19430012) (4-25b*)

SIL Part no. 19430012 - (36 Teeth)

Also available as part of a complete SIL GP200 Gear Box.


Our Price: 25.00     

Out of stock

GP200 4th Gear (SIL) 36 Teeth (19430012)




GP150 4th Gear (Vijay Super MKII Late SIL) (4-25c)

SIL 4th Gear fitted to late GP150/Vijay Super MKII mid 1980's Part No. 19230006 also the same as SX200 and TV175 Series 2 & 3.

Our Price: 25.00      Item in stock!
GP150 4th Gear (Vijay Super MKII Late SIL)





GP200 Gear Cluster (SIL) 22230501 (4-27a*)

SIL Part no. 22230501 - (10-12-16-18 Teeth)

Also available as part of a complete SIL GP200 Gear Box.


Our Price: 35.00      Item in stock!
GP200 Gear Cluster (SIL) 22230501





GP150 Gear Cluster (Vijay Super Early SIL) 22030501 (4-27b)

SIL Gear Cluster for early GP150 and Vijay Super (early Indian) 22030501

Our Price: 35.00      Item in stock!
GP150 Gear Cluster (Vijay Super Early SIL) 22030501





GP150 Gear Cluster (Vijay Super MKII Late SIL) 22430501 (4-27c)

SIL GP150 Gear Cluster fitted to late GP150/Vijay Super MKII mid 1980's Part No. 22430501.

Our Price: 35.00      Item in stock!
GP150 Gear Cluster (Vijay Super MKII Late SIL) 22430501





Layshaft (SIL) (4-30*)

Scooters India layshaft for all models. (1 required)

Our Price: 39.95     

Out of stock

Layshaft (SIL)




Final Drive Bearing (SIL) (4-39*)

For all models (1 required)

Our Price: 19.95     

Out of stock

Final Drive Bearing (SIL)




GP200 Gear Box (SIL) 4 Gears & Cluster (4-56*)

SIL GP200 gear box includes 4 gears and a cluster.

List Price: 155.00
Our Price: 135.00
You Save: 20.00 (13%)
    

Out of stock

GP200 Gear Box (SIL) 4 Gears & Cluster




GP150 Gear Box (Early SIL Vijay Super) 4 Gears & Cluster (4-56a*)

Early Indian SIL GP150 (Vijay Super) gear box includes 4 Gears and a Cluster. Fitted to SIL GP150/Vijay Super models from the start of production in 1975 until August 1984.

List Price: 155.00
Our Price: 119.95
You Save: 35.05 (23%)
    

Out of stock

GP150 Gear Box (Early SIL Vijay Super) 4 Gears & Cluster




GP150 Gear Box (Late SIL Vijay Super MKII) 4 Gears & Cluster (4-56b*)

SIL GP150 (Late Indian Vijay Super MKII) Gear Box includes 4 Gears and a Cluster. Fitted to all SIL GP150's from August 1984.

List Price: 155.00
Our Price: 119.95
You Save: 35.05 (23%)
    

Out of stock

GP150 Gear Box (Late SIL Vijay Super MKII) 4 Gears & Cluster




Magneto Flange (with SIL Logo) (5-1*)

Scooters India magneto flange. For all models except Series 1 and early Series 2.

Our Price: 50.00      Item in stock!
Magneto Flange (with SIL Logo)





GP150/GP200 Indian Cylinder Cowling (SIL) (5-10*)

Slightly different to standard head cowlings as the cowling is wider to allow for a wider flywheel cowling.

Our Price: 19.95     

Out of stock

GP150/GP200 Indian Cylinder Cowling (SIL)




Page of 8  [ Back | Next ]

Browse Categories

Twitter

FaceBook

LCGB Membership Form LCGB Authentication Form