|
You are at : All > Sec 37 - Second-Hand (Used) Lambretta Parts > Second-Hand (Used) Lambretta Parts |
|
GP Gearbox End Plate (Innocenti) Used
(37-1-13*) Second-hand/used Innocenti gearbox end plate for GP models. (1 required) Discount is not applicable
|
|
 |
|||
|
|||||
|
LI/SX Gearbox End Plate (Innocenti) Used
(37-1-13a*) Second-hand/used Innocenti gearbox end plate for all Series 1, 2 & 3 models except very late Series 3 models. (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
LI/SX Gearbox End Plate (Spanish) Used
(37-1-13b*) Second-hand/used gearbox end plate for all Spanish models. (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
LI150 Series 1 Cylinder (Innocenti) Used
(37-1-43*) Cylinder barrel for LI150 Series 1 models. Second-hand/used and in good condition but may need a re-bore to suit oversize piston (1 required)
|
|
|
|||
|
|||||
|
LI125 Series 1 Cylinder (Innocenti) Used
(37-1-43a*) Cylinder barrel for LI125 Series 1 models. Second-hand/used and in good condition but may need a re-bore to suit oversize piston (1 required)
|
NO IMAGE |
|
|||
|
|||||
|
LI Series 1 & Early Series 2 Crankshaft (Used)
(37-2-1m*) Crankshaft for LI125 & LI150 Series 1 & early Series 2 models only. (1 required) Original Part No. 19012010. Second-hand/used and in good condition, flywheel thread and drive splines have been checked. (1 required)
|
NO IMAGE |
|
|||
|
|||||
|
Drive Side Bearing Flange (Innocenti) Used
(37-2-5*) Drive side bearing flange (Innocenti) for all models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
Early LI/TV Clutch Flange with Pin (Innocenti) Used
(37-3-14*) Early clutch flange with pin (Innocenti) for Series 1, 2 & early Series 3 models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
Late LI/SX Clutch Flange (Innocenti) Used
(37-3-14a*) Late clutch flange (Innocenti) for late Series Series 3 models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
GP Clutch Flange (Innocenti) Used
(37-3-14b*) GP clutch flange (Innocenti) for GP models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Early LI/TV Clutch Sprocket 46 Tooth (Innocenti) Used
(37-3-17*) Early LI, TV 46 tooth clutch sprocket (Innocenti) for Series 1, 2 & early Series 3 models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
Late LI/SX Clutch Sprocket 46 Tooth (Innocenti) Used
(37-3-17a*) Late LI, SX 46 tooth clutch sprocket (Innocenti) for late Series 3 models but can be fitted to early models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
GP200 Clutch Sprocket 47 Tooth (Innocenti) Used
(37-3-17b*) GP200 47 tooth clutch sprocket (Innocenti) for GP models but can be fitted to all models with the 18T front drive sprocket & 82 link chain. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
GP125/150 Clutch Sprocket 46 Tooth (Innocenti) Used
(37-3-17c*) GP125/150 46 tooth clutch sprocket (Innocenti) Originally fitted to Italian GP125 & 150 models, can be fitted to early & late LI/SX models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Clutch Bell (Innocenti) Used
(37-3-18*) Clutch bell (Innocenti) for all models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
Chain 80 Pitch (Used)
(37-3-23*) 80 pitch chain for all models except GP200 (1 required) Second-hand/used and in good condition. Chain will show signs of stretching. (1 required) Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Chain 82 Pitch (Used)
(37-3-23a*) 82 pitch chain for GP200 models fitted with a 47 tooth clutch sprocket (1 required) Second-hand/used and in good condition. Chain will show signs of stretching. (1 required) Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Sliding Dog (Innocenti) Used
(37-3-24*) Sliding dog (Innocenti) for all models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
Drive Assembly Spring (Innocenti) Used
(37-3-25a*) Drive assembly spring (Innocenti) for Series 2, 3 & GP models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
Drive Assembly Spring Series 1 & Early Series 2 (Innocenti) Used
(37-3-25b*) Drive assembly spring (Innocenti) for Series 1 & early Series 2 models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
Drive Assembly Washer (Innocenti) Used
(37-3-26*) For all models except Series 1 & early Series 2 (1 required) Second-hand/used and in good condition (1 required) Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Drive Assembly Washer (Used)
(37-3-26a*) For all models except Series 1 & early Series 2 (1 required) Second-hand/used and in good condition (1 required) Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Drive Assembly Bolt with fixed Washer (Innocenti) Used
(37-3-27*) Drive assembly bolt with fixed washer (Innocenti) for all models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
Crankshaft Drive Sleeve (Innocenti) Used
(37-3-33a*) Crankshaft drive sleeve (Innocenti) for all models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
15 Tooth Drive Sprocket (Innocenti) Used
(37-3-34*) 15 tooth drive sprocket (Innocenti) for all models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
SX200/TV175 1st Gear (49 Teeth) Innocenti (Used)
(37-4-23*) For all SX200/TV175 models. (Second-hand/used and in good condition) Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Gear Selector Sliding Dog (Innocenti) Used
(37-4-26*) Gear selector sliding dog (Innocenti) for all models. Second-hand/used and in good condition but item will show some signs of wear (1 required) Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Series 1, 2 & 3 Layshaft (Innocenti) Used
(37-4-30*) Layshaft (Innocenti) for Series 1, 2 & 3 models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
Late Series 3/GP Layshaft (Innocenti) Used
(37-4-30a*) Layshaft (Innocenti) for late Series 3 & GP models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
Series 1, 2 & 3 Layshaft (Used)
(37-4-30b*) Layshaft for Series 1, 2 & 3 models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
Late Series 3/GP Layshaft (Used)
(37-4-30c*) Layshaft for late Series 3 & GP models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
Gear Selector (Innocenti) Used
(37-4-34*) Gear selector (Innocenti) for all models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
Gear Selector (Used)
(37-4-34a*) Gear selector for all models. Second-hand/used and in good condition (1 required) Gear selector is unmarked so could be either Spanish Serveta, SIL or pattern Italian. Discount is not applicable
|
NO IMAGE |
|
|||
|
|||||
|
Rear Hub Bearing (Innocenti) Used
(37-4-39*) Rear hub bearing (Innocenti) for GP models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
GP Gear Selector Shaft (Innocenti) Used
(37-4-42*) Gear selector shaft (Innocenti) for all GP models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
LI/SX Gear Selector Shaft (Innocenti) Used
(37-4-52*) Gear selector shaft (Innocenti) for all LI, TV & SX Series 1, 2 & 3 models. Second-hand/used and in good condition (1 required) Discount is not applicable
|
|
|
|||
|
|||||
|
LI125 Gear Box (Innocenti) 4 Gears & Cluster (Used)
(37-4-56*) Innocenti LI125 gear box (Second-hand/used and in good condition) for LI125 Series 1, 2 & 3 models. Discount is not applicable
|
|
|
|||
|
|||||
|
LI150 Gearbox (Innocenti) Used (4 Gears & Cluster)
(37-4-56a*) Innocenti LI150 gear box (Second-hand/used and in good condition) for LI150 Series 1, 2 & 3 models. Discount is not applicable
|
|
|
|||
|
|||||
|
SX150 Gearbox (Innocenti) Used (4 Gears & Cluster)
(37-4-56b*) Innocenti SX150 gear box (Second-hand/used and in good condition) for SX150 Series 3 model. Discount is not applicable
|
|
|
|||
|
|||||
|
TV175/SX200 Gearbox (Innocenti) Used (4 Gears & Cluster)
(37-4-56c*) Innocenti TV175/SX200 gear box (Second-hand/used and in good condition) for SX200 & TV175 Series 2 & 3 models. Discount is not applicable
|
|
|
|||
|
|||||
|
TV200 Gearbox (Innocenti) Used (4 Gears & Cluster)
(37-4-56d*) Innocenti TV200 gear box (Second-hand/used and in good condition) for TV200 Series 3 model. Discount is not applicable
|
|
|
|||
|
|||||
|
GP125/GP200 Gearbox (Innocenti) Used (4 Gears & Cluster)
(37-4-56e*) Innocenti GP125/GP200 gear box (Second-hand/used and in good condition) for GP125 & GP200 models. Discount is not applicable
|
|
|
|||
|
|||||
|
LI/SX Kickstart Piston Return Plate (Innocenti) Used
(37-4-57*) Kickstart piston return plate originally fitted to late Series 3 models but will fit all Series 1, 2 & 3 models except GP models. Discount is not applicable
|
|
|
|||
|
|||||
|
LI Series 1 & Early Series 2 Magneto Flange (Used)
(37-5-1*) Magneto flange for LI125 & LI150 Series 1 & early Series 2 models only. Original Part No. 19010004. Second-hand/used and in good condition. (1 required)
|
NO IMAGE |
|
|||
|
|||||
|
Air Intake Cover (Series 1 & 2 LI125/LI150) Used (Innocenti)
(37-6b-54*) Air intake cover for Series 1 & 2 LI125 & LI150 models. Second-hand/Used & in good condition. This item has been sandblasted (1 required)
|
|
|
|||
|
|||||
|
Series 2 Air Inlet Manifold (Used) Innocenti
(37-6b-84*) Air inlet manifold for Series 2 models. Second-hand/Used & in good condition. This item has been sandblasted (1 required)
|
|
|
|||
|
|||||
|
Series 3 Air Inlet Manifold (Used) Innocenti
(37-6b-84a*) Air inlet manifold for Series 3 models. Second-hand/Used & in good condition. This item has been sandblasted (1 required)
|
|
|
|||
|
|||||
|
LI Series 2 Handlebar Top (Used) Innocenti
(37-8-35*) Handlebar top for LI Series 2 models. Second-hand/Used & in good condition but will need sandblasting (1 required)
|
NO IMAGE |
|
|||
|
|||||
|
LI Series 3 Handlebar Top (Used) Innocenti
(37-8-35a*) Handlebar top for LI Series 3 models. Second-hand/Used & in good condition but will need sandblasting (1 required)
|
NO IMAGE |
|
|||
|
|||||
|
LI Series 1 Handlebar Top & Bottom (Used) Innocenti
(37-8-43*) Handlebar top & bottom for LI Series 1 models. Second-hand/Used & in good condition but has been alloy welded (1 required) Discount is not applicable
|
NO IMAGE |
|
|||
