You are at : All > Spanish Serveta

Page of 3  [ Back | Next ]

Shock Absorber Shaft (Spanish Serveta) (1-2b*)

Shock absorber shaft for Spanish Serveta models only (Spanish new old stock) Longer than Innocenti or Scooters India shock absorber shafts.

Discount is not applicable


Our Price: 19.95     

Only 5 in stock

Shock Absorber Shaft (Spanish Serveta)





Final Drive Stud (Spanish) (1-6c*)

Final drive stud for all models. (4 required) Original Spanish new old stock.

Our Price: 0.95      Item in stock!
NO
IMAGE






LI Silentblock Bush (Spanish) (1-9f*)

Silent block bush for all LI Series 1, 2 & 3, TV175 Series 2, & Spanish models. (2 required) A short engine spindle is required with this bush (Spanish new old stock)

Discount is not applicable


Our Price: 15.00     

Only 1 in stock

LI Silentblock Bush (Spanish)





Magneto Flange Stud (Spanish) (1-12b*)

Magneto flange stud for all models (3 required) Original Spanish new old stock.

Our Price: 0.95      Item in stock!
Magneto Flange Stud (Spanish)





LI/SX Rear Brake Shoes Pivot Pin (Spanish) (1-24*)

Rear brake shoes pivot pin for all LI/SX Models except GP (2 required) GP brake shoe pivot pin can be used instead of LI/SX brake shoe pivot pin as long as you us a GP brake cam & brake shoe locating spring.

Our Price: 3.95      Item in stock!
LI/SX Rear Brake Shoes Pivot Pin (Spanish)





Engine Buffer (Spanish) (1-25c*)

Engine buffer for all models (1 required)Spanish new old stock.

Discount is not applicable


Our Price: 5.95      Item in stock!
Engine Buffer (Spanish)





Kick Start Buffer (Spanish) (1-33c*)

Kick start buffer for all models (1 required) Spanish new old stock.

Discount is not applicable


Our Price: 5.00      Item in stock!
Kick Start Buffer (Spanish)





125cc Cylinder Head Gasket (0.8mm) Spanish (1-49p*)

Cylinder Head Gasket 0.8mm. For all 125cc Cylinders. (1 required)

Our Price: 2.00      Item in stock!
125cc Cylinder Head Gasket (0.8mm) Spanish





Cylinder Head Assembly Distance Nut (14mm A/F) Spanish (1-51a*)

Cylinder head assembly distance nut (14mm A/F across flats) for all models (1 required) Spanish new old stock.

Our Price: 2.50      Item in stock!
Cylinder Head Assembly Distance Nut (14mm A/F) Spanish





Bearing Flange Screw (Phillips Head Type) Spanish (2-4c)

Bearing flange screw with Phillips head for all Series 1, 2, 3, GP, Serveta, J-Range & Vega models (4 screws required) Spanish original old stock.

Our Price: 0.40      Item in stock!
Bearing Flange Screw (Phillips Head Type) Spanish





Bearing Flange Screw (Phillips Head Type) Set of 4 (Spanish) (2-4d*)

Bearing flange screw with phillips head for all Series 1, 2, 3, GP, Serveta, J-Range & Vega models (1 set of 4 screws required) Spanish original old stock.

List Price: 1.60
Our Price: 1.30
You Save: 0.30 (19%)
     Item in stock!
Bearing Flange Screw (Phillips Head Type) Set of 4 (Spanish)





Clutch Arm (Spanish) (3-2a*)

Clutch arm for all Series 1, 2 3, GP & Spanish models (Spanish Serveta new old stock) 1 required.

Discount is not applicable


Our Price: 11.95     

Only 2 in stock

Clutch Arm (Spanish)





LI Push Rod (Spanish) (3-9b*)

LI push rod for all models except GP (1 required) Spanish new old stock.

Our Price: 2.50      Item in stock!
LI Push Rod (Spanish)





Clutch Centre Nut (Spanish) (3-21b*)

Clutch centre nut for all models. Spanish new old stock.

Discount is not applicable


Our Price: 1.95      Item in stock!
Clutch Centre Nut (Spanish)





Lower Chain Guide (Spanish) (3-32b*)

Lower chain guide for all models except GP200 (1 required) Spanish new old stock.

Discount is not applicable


Our Price: 9.95      Item in stock!
Lower Chain Guide (Spanish)





LI125 Series 1, 2 & 3 1st Gear (51 Teeth) Spanish (4-22f*)

LI125 1st gear (51 Teeth) for all Series 1, 2 & 3 LI125 models. Spanish Serveta new old stock (1 required)

Our Price: 50.00      Item in stock!
LI125 Series 1, 2 & 3 1st Gear (51 Teeth) Spanish





Gear Selector with Pins (Spanish Serveta) (4-34a*)

For all models. Original Spanish Serveta gear selector with gear selector pins and cirlips (1 required) New Spanish old stock.

Discount is not applicable.


Our Price: 19.95     

Out of stock

Gear Selector with Pins (Spanish Serveta)




Final Drive Oil Seal (Spanish) (4-40b*)

Final drive oil seal for all Series 1, 2 & 3 models. Manufactured for Serveta.

Discount is not applicable


Our Price: 2.50      Item in stock!
Final Drive Oil Seal (Spanish)





Neutral Gear Selector Sensor (Spanish) (4-58*)

Neutral gear selector sensor for late Spanish Serveta models fitted with a neutral gear selector sensor to the rear of the engine. (1 required)

Discount is not applicable


Our Price: 25.00     

Only 1 in stock

Neutral Gear Selector Sensor (Spanish)





Neutral Gear Selector Sensor Fixing Plate (Spanish) (4-59*)

Neutral gear selector sensor fixing plate for late Serveta models fitted with a neutral gear selector sensor to the rear of the engine. (1 required)

Discount is not applicable


Our Price: 2.50     

Only 6 in stock

Neutral Gear Selector Sensor Fixing Plate (Spanish)





Magneto Flange with NU205 Bearing & Seals (Spanish Serveta Lynx) (5-1b*)

Magneto flange with provision for starter motor fitted with NU205 bearing, seal retainer, magneto circlip & 2 oilseals for Spanish Serveta Lynx model. (Spanish Serveta new old stock)

Discount is not applicable


Our Price: 80.00     

Out of stock

Magneto Flange with NU205 Bearing & Seals (Spanish Serveta Lynx)




Spanish Serveta Air Filter (Casa Lambretta B 251) (6b-86d*)

Toolbox air filter for Spanish Serveta models (1 required)

Discount is not applicable


List Price: 15.00
Our Price: 13.00
You Save: 2.00 (13%)
     Item in stock!
Spanish Serveta Air Filter (Casa Lambretta B 251)





Spanish Serveta Air Inlet Hose (Casa Lambretta B 252) (6b-95f*)

On Spanish Serveta models the Inlet Airhose connects to the toolbox and uses two Series 3 airhose clamps.

Discount is not applicable


List Price: 11.95
Our Price: 10.00
You Save: 1.95 (16%)
    

Only 4 in stock

Spanish Serveta Air Inlet Hose (Casa Lambretta B 252)





Stand Spring (Serveta Lynx) (7-26b*)

For very late Spanish Serveta Lynx models (1 required).

Discount is not applicable.


Our Price: 6.00      Item in stock!
Stand Spring (Serveta Lynx)





Throttle Support Screw (Spanish) (8-8a*)

Throttle support screw with phillips head (Spanish new old stock) originally fitted to Spanish models, can be used on any Lambretta model. (2 required)

Discount is not applicable


Our Price: 1.00      Item in stock!
Throttle Support Screw (Spanish)





Dog Leg Handlebar Levers Spanish Serveta (Large Balls) a pair (8-9f*)

Originally manufactured for Spanish Serveta Lambretta models, will fit any Series 3 Lambretta in black paint. (a pair) Spanish new old stock.

Discount is not applicable


Our Price: 19.95     

Out of stock

Dog Leg Handlebar Levers Spanish Serveta (Large Balls) a pair




Throttle Roller (Spanish Serveta Lynx) (8-10b*)

Throttle roller for Spanish Serveta Lynx models (1 required) Can be used on any late Series 3 Lambretta model fitted with a SX/GP throttle roller with a 4mm roller pin hole.

Discount is not applicable


List Price: 5.95
Our Price: 4.95
You Save: 1.00 (17%)
     Item in stock!
Throttle Roller (Spanish Serveta Lynx)





Cables Guide Clip (Spanish) (8-14a*)

Cable guide clip for all models (2 required) Spanish new old stock.

Discount is not applicable.


Our Price: 1.95      Item in stock!
Cables Guide Clip (Spanish)





Steering Lock with Keys (Late Spanish Serveta Lynx) (8-26d*)

Steering lock with keys for late Spanish Serveta Lynx models. Fitted to the frame stem (not handlebars) in the legshields. New old stock.

Discount is not applicable.


Our Price: 15.00      Item in stock!
Steering Lock with Keys (Late Spanish Serveta Lynx)





Steering Lock Holder (Late Spanish Serveta Lynx) (8-26e*)

Steering lock holder for late Spanish Serveta Lynx models (Spanish) fitted to the steering lock in the legshields. New old stock.

Discount is not applicable.


Our Price: 9.95     

Out of stock

Steering Lock Holder (Late Spanish Serveta Lynx)




Steering Lock Rubber Surround (Late Spanish Serveta Lynx) (8-26f*)

Steering lock rubber surround for late Spanish Serveta Lynx models, fits around hole in the legshields for the steering lock. New old stock.

Discount is not applicable.


Our Price: 5.95     

Out of stock

Steering Lock Rubber Surround (Late Spanish Serveta Lynx)




Steering Lock Flap (Late Spanish Serveta Lynx) (8-26j*)

Steering lock flap for late Spanish Serveta Lynx models, fits above hole in the legshields for the steering lock (Marked Lic Neiman Clausor Barcelona) Spanish new old stock.

Discount is not applicable


Our Price: 1.50     

Out of stock

Steering Lock Flap (Late Spanish Serveta Lynx)




Upper Steering Cup (Spanish) (8-32a*)

Upper steering cup for all models (1 required) Original Spanish Serveta new old stock.

Discount is not applicable


Our Price: 9.95     

Out of stock

Upper Steering Cup (Spanish)




Serveta Lynx Handlebar Sticker (8-35h*)

Handlebar adhesive transfer for Serveta Lynx models.

Discount is not applicable


Our Price: 9.95      Item in stock!
Serveta Lynx Handlebar Sticker





LI150/Jet200 Gearchange Roller (Spanish Serveta) (8-42d*)

Gear change roller in black for Spanish Serveta models, will also fit late Series 3 & GP models fitted with nylon rollers with 4mm hole (1 required) New Spanish Serveta old stock.

Discount is not applicable


Our Price: 10.00      Item in stock!
LI150/Jet200 Gearchange Roller (Spanish Serveta)





Jet200/LI150 Special Handlebar Lower (Spanish Serveta) (8-43e*)

Handlebar lower for Jet200 & LI150 Special Spanish Serveta models. (Spanish new old stock)

Discount is not applicable


List Price: 175.00
Our Price: 150.00
You Save: 25.00 (14%)
    

Out of stock

Jet200/LI150 Special Handlebar Lower (Spanish Serveta)




Spanish Serveta Amiga Speedometer (120kmph) (8-58j-1*)

120kmph speedometer for Spanish Serveta Amiga model only (1 required) Spanish new old stock. Some slight scruff marks on lens. Manufactured by Leonelli.

Discount is not applicable


Our Price: 120.00     

Out of stock

Spanish Serveta Amiga Speedometer (120kmph)




Late Spanish Serveta Lynx Forks (8-82b*)

Forks for late Spanish Serveta Lynx model only. These forks will only fit a late Spanish Serveta Lynx & are not suitable for any other models.

Discount is not applicable


Our Price: 80.00     

Only 1 in stock

Late Spanish Serveta Lynx Forks





Late Spanish Serveta Lynx Forks (With Damper Brackets) (8-82c*)

Forks for late Spanish Serveta Lynx model only. These forks will only fit a late Spanish Serveta Lynx & are not suitable for any other models.

Discount is not applicable


Our Price: 79.95     

Out of stock

Late Spanish Serveta Lynx Forks (With Damper Brackets)




Spanish Serveta Amiga Forks (With Brackets for Turning Front Mudguard & Dampers) (8-82d*)

Forks for late 1980's Spanish Serveta Amiga model only. These forks will only fit a late Spanish Serveta Amiga & are not suitable for any other models. New Spanish old stock.

Discount is not applicable


Our Price: 100.00     

Only 1 in stock

Spanish Serveta Amiga Forks (With Brackets for Turning Front Mudguard & Dampers)





Throttle Shaft Return Spring (Spanish Serveta) (8-98*)

Throttle shaft return spring for late Spanish Serveta models (1 required)

Discount is not applicable


Our Price: 4.95     

Out of stock

Throttle Shaft Return Spring (Spanish Serveta)




Lower Damper Nut (Late Spanish Serveta) (8-100)

Lower damper nut with 9mm thread for late Spanish Serveta models fitted with fat dampers (2 required)

Our Price: 0.50     

Only 1 in stock

Lower Damper Nut (Late Spanish Serveta)





Rear Brake Arm (Spanish Serveta) (9-8b*)

Original Spanish Serveta rear brake arm (new old stock) for all models.

Discount is not applicable


Our Price: 11.95      Item in stock!
Rear Brake Arm (Spanish Serveta)





LI Front Hub Back Plate (with Inspection Holes) Spanish Serveta (9-11a*)

LI front hub back plate in black with inspection holes for 2 brake shoe inspection plugs as originally fitted to late Spanish Serveta models, can be used on all LI/SX Series 1, 2 & 3 models that are fitted with drum links. (1 required)

List Price: 25.00
Our Price: 19.95
You Save: 5.05 (20%)
    

Only 6 in stock

LI Front Hub Back Plate (with Inspection Holes) Spanish Serveta





Front Axle Nut (Late Spanish Serveta) (9-14c*)

Front axle nut for late Spanish Serveta models (2 required) Spanish new old stock.

Discount is not applicable


Our Price: 2.00      Item in stock!
Front Axle Nut (Late Spanish Serveta)





Axle Distance Piece (Series 1, 2 & early Series 3) Spanish Serveta (9-48b*)

For all models (1 required) Originally fitted to all models before 1965, can be used for later models. (Spanish new old stock)

Our Price: 5.95      Item in stock!
Axle Distance Piece (Series 1, 2 & early Series 3) Spanish Serveta





Wheel Rim Stud (with Square Slot) (9-55a)

Replacement wheel rim stud (4 required per wheel rim) Ideal replacement stud for original Italian wheel rims. (New old stock Spanish Serveta)

Our Price: 1.95      Item in stock!
Wheel Rim Stud (with Square Slot)





Brake Shoe Inspection Bung (Spanish Serveta) (9-60a*)

For Spanish Serveta Lambretta models (2 required)

Discount is not applicable


Our Price: 2.50      Item in stock!
Brake Shoe Inspection Bung (Spanish Serveta)





Rear Light Lens (Late Serveta) CEV (10-2h*)

Original CEV rear light lens for late Spanish Serveta models (1 required) Also available complete late Serveta rear light unit.

Discount is not applicable.


Our Price: 18.00     

Out of stock

Rear Light Lens (Late Serveta) CEV




Rear Light Lens (Late Serveta) Goneli (10-2j*)

Rear light lens for late Spanish Serveta models (1 required) Manufactured by Goneli in Spain.

Discount is not applicable


Our Price: 19.95      Item in stock!
Rear Light Lens (Late Serveta) Goneli





Page of 3  [ Back | Next ]

Browse Categories

Twitter

FaceBook

LCGB Membership Form LCGB Authentication Form